D-Link DWL-8200AP User Manual page 38

Hide thumbs Also See for DWL-8200AP:
Table of Contents

Advertisement

Security:
The Multi-SSIDs security can be WPA/WPA2-Enterprise or WPA-Auto-Enterprise only when the Primary SSID's
security is at the same security level. Also, they must connect to the same RADIUS server.
Ethernet:
Select "LAN1" if you wish to configure the network on LAN 1 (PoE). Select "LAN2" to set up the network on LAN
2.
VLAN ID:
Enter the VLAN ID you want to use (0 - 4094)
Select HEX or ASCII.
Key Type:
Select 64-bit, 128-bit, or 152-bit.
Key Size:
Key:
Select the 1st key all the way through the 4th key, to be set as the active key. Enter key here.
D-Link DWL-8200AP User Manual
When Primary SSID is set to any of
the following security levels:
None
Open System (WEP)
Shared Key (WEP)
WPA-Personal
WPA2-Personal
WPA-Auto-Personal
WPA-Enterprise
WPA2-Enterprise
WPA-Auto-Enterprise
Multi-SSID can use any of these
security levels:
None
Open System (WEP)
Shared Key (WEP)
WPA-Personal
WPA2-Personal
WPA-Auto-Personal
None
Open System (WEP)
Shared Key (WEP)
WPA-Personal
WPA2-Personal
WPA-Auto-Personal
WPA-Enterprise
WPA2-Enterprise
WPA-Auto-Enterprise
8

Advertisement

Table of Contents
loading

Table of Contents