D-Link DWL-8200AP User Manual page 24

SSID Broadcast:
Enable or Disable SSID broadcast. Enabling this feature broadcasts the SSID across the network.
Channel:
Displays the default channel for the wireless network. All devices on the network must share the same channel.
The channel of an 802.11a network may not be set manually in certain regions (e.g. Europe and USA) in order to
comply with DFS (Dynamic Frequency Selection).
Note: The wireless adapters will automatically scan and match the wireless setting.
Auto Channel Scan:
This option is unavailable in WDS with AP mode.
Remote AP MAC
Enter the MAC addresses of the APs in your network that will serve as bridges to wirelessly connect multiple networks.
Address:
WDS Site Survey:
Click on the Scan button to search for available wireless networks. Click on the network you want to connect to.
Authentication:
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices that share the same WEP settings.
Select Open System/Shared Key to allow either form of data encryption.
Select WPA-Personal to secure your network using a password and dynamic key changes. (No RADIUS server
required.)
Select WPA2-Personal to secure your network using a password and dynamic key changes. No RADIUS server
required and encryption of data is upgraded with the Advanced Encryption Standard (AES).
Select WPA-Auto-Personal to allow the client to either use WPA-Personal or WPA2-Personal.
D-Link DWL-8200AP User Manual 2