Visual Guidance Settings - Audiovox NAV 104 User Manual

5.3.6 Visual guidance settings

Adjust how the software helps you navigate with different kinds of route related
information on the Map screen.
The data fields in the corner of the Map screen can be customised. Tap
this button and select the values you want to see. The values can be
different when you navigate a route from when you are just cruising
without a given destination. You can select general trip data like your
current speed or the altitude, or route data related to your final destination
or the next waypoint on your route.
You may need a petrol station or a restaurant during your journey. This
feature displays a new button on the map when you are driving on
motorways. Tap this button to open a panel with the details of the next
few exits or service stations. Tap any of them to display it on the map and
add it as a waypoint to your route if needed.
Select the service types displayed for the motorway exists. Choose from
the POI categories.
Whenever adequate information is available, lane information similar to
the real ones on road signs above the road is displayed at the top of the
map. You can turn this feature on or off.
If you are approaching a motorway exit or a complex intersection and
the needed information exists, the map is replaced with a 3D view of the
junction. You can turn this feature on or let the map be displayed for the
whole route.
When entering tunnels, the surface roads and buildings can be disturbing.
This feature shows a generic picture of a tunnel instead of the map. A top-
down overview of the tunnel and remaining distance are also displayed.
Turn on the route progress bar to see your route as a straight line on the
left side of the map. The blue arrow represents your current position and
moves up as you travel. Waypoints and Traffic events are also displayed
on the line.
When you slow down while driving on a motorway, there is a chance that
you are in a traffic jam so Audiovox NAV 104 offers you a detour using the
next exit. The message shows you distance of the exit and the difference
in distance and estimated time compared to the original route. You can
choose from one of the following options:
•
Tap Dismiss or just ignore the message if you want to keep the
original route.
•
Tap Preview to see the overview of the original route and the
detour to make the decision. You can accept the detour as
offered or increase the bypassed motorway segment before
accepting.
•
Turn to the suggested new direction and the route will be
automatically recalculated.
GB
232