Position Markers; Vehimarker And Lock-On-Road; Selected Map Location (Cursor) And Selected Map Object - Audiovox NAV 104 User Manual

2.3.2 Position markers

2.3.2.1 Vehimarker and Lock-on-Road

When your GPS position is available, Audiovox NAV 104 marks your current position
with the Vehimarker. By default, this marker is a blue arrow, but you can change this icon
in Settings.
The exact location of the Vehimarker depends on the vehicle type used for route
calculation and the navigation mode. Both can be set in Route settings (page 224).
•
If you choose pedestrian and/or off-road navigation: The Vehimarker is at your
exact GPS position. The direction of the icon shows your current heading.
•
In all other cases: The Vehimarker may not show your exact GPS position and
heading. If roads are near, it is aligned to the nearest road to suppress GPS
position errors, and the direction of the icon is aligned to the direction of the
road.

2.3.2.2 Selected map location (Cursor) and selected map object

You can mark a map location in the following ways:
•
Tap the map when navigating,
•
Tap the map when you are asked to confirm the destination at the end of a
search, or
•
Tap the map in Find on Map (page 181)
When a map location is selected, the Cursor appears at the selected point on the map.
The Cursor is displayed with a radiating red dot (
levels.
The location of the Cursor can be used as the destination of the route, a new alert
point, you can search for Places around it, or you can save this location as one of your
Favourite destinations.
You can also select some of the objects on the map. If you tap the map at the icon of
a Place of Interest or an alert point, the object will be selected (you see a red circling
border around the object), and you can get information about this object or use it as a
route point.
GB
) to make it visible at all zoom
139