Route Settings - Audiovox NAV 104 User Manual

5.3.3 Route settings

These settings determine how
Button
To let the route fit your needs, you can also set which road types are to be considered for
or to be excluded from the route if possible.
Excluding a road type is a preference. It does not necessarily mean total prohibition.
If your destination can only be accessed using some of the excluded road types, they
will be used but only as much as necessary. In this case a warning icon will be shown
on the My Route screen, and the part of the route not matching your preference will be
displayed in a different colour on the map.
In the list of road types you can see in how many segments and what total length of the
road type is used in the current route.
routes
will be calculated.
You can set the type of vehicle you will use to navigate the route. Based
upon this setting, some of the road types can be excluded from the route, or
some of the restrictions may not be taken into account in route calculation.
You can edit the parameters of the selected vehicle profile, or you can even
create new vehicle profiles if you tap More.
On-road navigation creates a turn by turn itinerary using the road network
on the map. Switch to off-road navigation to navigate between destinations
in a straight line.
The route calculation can be optimised for different situations and vehicle
types by changing the planning method. See below for details.
If the selected routing method is not Green, you can have your route
compared to the best green alternative on the screen when confirming the
route. If this alternative is much better than the selected method, you can
quickly switch to Green mode.
GB
Description
224