Table of Contents
Advertisement
2. Software operation
2.1 Search Tool Software
2.1.1
Search the IP address of the camera.
When the device has been mounted properly, you can double click the Icon
"
" run this IP address search tool.
Note: The software searches IP Servers automatically over LAN.
There are 2 cases:
1. No IP Cameras found within LAN. After about 1 minute search, the Equipments List
Field not show the IP address.
2. IP Cameras have been installed within LAN. All the IP Cameras will be listed and the
total number is displayed in the Equipments list field as shown in Figure 2.1
Note：
1. Current Computer indicates the Computer's IP Address information.
2. Equipment information indicates the IP camera's IP Address information.
3. If you find that the camera's "Subnet Mask", "Gateway", "DNS Server" is not as
some as your current computer's. You need try to change the camra's IP address.
Make sure the "Subnet Mask"
your current computer s
Figure 2.1
"DNS Server" is the same
, "Gateway",
7
as your router's or
Advertisement
Table of Contents
