Email And Ftp Service Settings - IP-Cam AJ Series User Manual

3.5.6 E-mail and FTP service Settings
The above setting is a preparation for the alarm function, the sender should be
entered the sender's email address，recipient 1、2、3、4 is filled with recipient E-mail
address；SMTP server should be filled with the sender email SMTP server，e.g. the
sender email address is abc@163.com，and enter mail.163.com. Generally SMTP port
is 25，do no need to change；when needs to check, just tick it, and enter SMTP user
and SMTP password，both of them are provided by Email provider，and test according
to reference；when needs to send, please tick Email notification Internet IP address；
The e-mail server and other information can be obtained from the mail service
provider the email notification is image captured when alarming if no email
notification is needed when alarming, and then no need to enter.
Set up FTP service, you can fill in parameters like following:
The above setting is equally similar to Mail Server Settings,when alarming is
triggered it also sends image,please enter FTP server,FTP port,FTP user,FTP
Figure 3.31
Figure 3.32
29