Thank you for buying our IP camera IPCAM AJ Series IP Camera products are designed and equipped for local and remote network video surveillance system, including wired IP bullet camera, wireless IP bullet camera, IP IR dome camera, IP IR waterproof camera, IP Pan/Tilt/Zoom Camera etc. We...
1. Product Introduction 1.1 Safety Instructions (1). Use the proper power source. Do not use this product with a power source that supplies more than the specified Voltage (100-240V AC). (2). Never insert anything metallic into the camera. Inserting metal object into the camera can be a source of dangerous electric shock. (3).
*-Maximum support 15 users viewing at the same time, no limit for users if using forwarder Server function; *- Built in Web Server, convenient for users to use standard browse to realize the real time monitoring and setting administration; *-Support WIFI:802.11 b/g/n wireless networking; *-Support remote system update;...
Figure 1.1 Figure 1.2 1: Audio Out , 2: Audio In 3: Ethernet interface: RJ-45 interface. Power Supply Light: constant on after power up Network light: constant sparkle after power up data transmission. 4: Antenna: 5: Power input interface: connect direct current 5V Power 1.5 Hardware Installation Follow the steps below to set up your camera hardware.
Figure 1.3 1.6 Software Installation Figure 1.4 Open the CD Install the follow software: 1. ActiveX: Click “OCX setup”—“Next”—“Install”—“Finish”. 2. Search Tool: Open the CD, click ,The Search Tool will run automatically.( No need to install. You can copy this software to your desktop.) Figure 1.5...
2. Software operation 2.1 Search Tool Software 2.1.1 Search the IP address of the camera. When the device has been mounted properly, you can double click the Icon “ ” run this IP address search tool. Figure 2.1 Note: The software searches IP Servers automatically over LAN. There are 2 cases: 1.
4. If you don’t know how to configure your camera’s IP address. You can click “ Update” button. The Search Tool software can help you configure a usable IP camera automatically. 2.1.2 Configuration of the Network Subnet Mask, Gateway, DNS Server Once your camera’s IP address’...
Figure 3.1 Default username: admin Password: no password. Input the correct user name and password, the Sign In interface will pop-up. There are three models to login (figure 3.2). Figure 3.2 (1) ActiveX Mode (For IE Browser): available in IE6.0 or above explorer (2) “RTSP Stream Mode”: available in Firefox, Safari, and Google browser.
Page 11
Choose Active Mode (For IE Browser), and sign in. The first time login the camera, maybe get ActiveX prompt as the picture below, please download the Ocx(or run in CD) and install first then choose Run Add-on, refresh and login the camera again, then will see live video, details as below: Figure 3.3 After Download Ocx-Setup (oPlayer Software), Click and install it, untill finished.
Page 12
Figure 3.3 Windows XP system Figure 3.4 Win7 System Note: If there is still no live video after run ActiveX, please try to enable the ActiveX options of IE security settings, please do the follow steps: 1. Close the firewall of your computer. 2.
Page 13
Figure 3.5 Figure 3.6 In Addition: you can also click “start” menu->“Internet Explorer”, choose “Internet attributes “ to enter, or via “Control Panel” ->“Internet Explorer”, enter to Security setting. 3. If there is still no image, please close your anti-virus software, and then try step 1 & 2 again.
Figure 3.7 Make sure that the firewall or anti-virus software doesn’t block the software or NOTE: ActiveX. If you couldn’t see live video, please close your firewall or anti-virus software, and try again. 3.3. View via Safari, Firefox, Google Browser Choose Server Push Mode (For Safari, Firefox, Google Browser), and sign in Server Push Mode doesn’t support ActiveX, so some functions are not available, such As Record, Audio, Talk, Speaker,The speed control bar, Zoom etc.),if you want to use...
3.4. Main Menu interface introduction Take the “Active Mode(For IE Browser)” For example:...
Page 16
Figure 3.8 The Pan/Tilt Feature only work when the cameras have this Pan/Tilt function. This option enables log detection. After the online user clicks this button, a log is entered into the camera’s Log Data documenting the IP address of users who have accessed the IP camera.
This setting changes the image frequency. This setting changes the image brightness. This setting changes the image contrast. This option resets all main menu options to factory default. This option opens the camera’s recording functionality menu. This option takes a snapshot of the current screen and saves the snapshot to the PC’s Hard Drive.
equipment. Embedded applications, up to 4 devices at the same time-line. Click the “second road equipment” and double-click “Current list of devices in the LAN” in the device entry name, host address, Http port will automatically be filled, require the user to fill in the correct account name and password, click “Add.”...
Figure 3.11 This sector is for DHCP and IP configuration, port forwarding is needed, If you choose to set IP address,please fill in the relative IP address, subnet mask, gateway, DNS server, Http port 3.5.3 Wireless Settings 1. Make sure the router is a wireless router. 2.
Figure 3.12 3.5.4 Dynamic DNS Setting (DDNS) 3.5.4.1 DDNS Setting: (1): Click > “DDNS Service Settings”. Figure 3.13 (2): Choose the DDNS, there are 4 kinds of options: (1): Manufacturer’ DDNS: We provide a free DDNS: vipcam.org. This domain is provided by manufacturer.
Page 21
Figure 3.14 (2): The Third Party DDNS: This domain is provided by the 3 party, such as Dyndns, Oray, 3322 If you use the third party DDNS, please choose the server you need, such as “3322.org” or“dyndns.org” as below: Figure 3.15...
Figure 3.16 You have to register an account firstly, keep the user, password, host, then fill in it. Note: Only one DDNS can be chosen, for example, if you use manufacturer’s DDNS, the 3rd party one won’t work, if use the 3 party DDNS, the manufacturer’s one won’t work.
Page 23
(1) Login the router. (2) Choose “Forwarding”, select “Virtual Servers” (3) Click the Add New button, pop-up below: Fill the service port (except 80), IP address of the camera, then click Save The port and IP address should be the same as Camera. BELKIN: (1) Login the router.
Page 24
Figure 3.18 DLINK: (1) Login the router. (2) Choose “Advanced”, select “Virtual Servers” (3) Input the port, IP address, Protocol, then click save. Note: The “public port” & “private port” should be the same as camera’s port, choose the protocol to be “both”.
Figure 3.29 After all these 4 steps done, then you can use the DDNS freely, check the DDNS status from the camera as below, and get the link of DDNS for internet view. Step: “Login”>” ”>”Device Info”: Figure 3.20 3.5.5.3 DDNS Register For example, you can go to Dyndns website to register a free account.
Page 26
Step1: enter http://www.dyndns.com/ and Create Account Figure 3.21 Step2: Set the username and password as below: Figure 3.22 Step3: After a minute, you will receive a E-mail from DynDNS Support and it will give you a confirmation address (e.g. https://www.dyndns.com/confirm/create/ONMzltcCBk6mcHJI5MhVD0g)
Page 27
Figure 3.23 Figure 3.24 Step4: When the Account Confirmed, login and start using your account. Choose Add Host Services(Figure 3.25) and enter Add New Hostname (Figure 3.26)page. Figure 3.25...
Page 28
Figure 3.26 Step5: On the Add New Hostname page. 1) input your Hostname. 2) choose Host with IP address 3) click Use auto detected IP address xxx.xx.xx.xxx. Then click Create Host. 4) after you have added a New Hostname , you need “Proceed to checkout” Figure 3.27...
Page 29
Figure 3.28 Figure 3.29 Step6: Now you obtained a Dynamic Domain Name(Figure3.30),and can use it in the DDNS Service Settings(details: 3.5.5) Notice: If you have a dynamic IP address, Make sure you have download the DynDNS’s “Update Client”. And installed it succeed in your computer. Figure 3.30...
3.5.6 E-mail and FTP service Settings Figure 3.31 The above setting is a preparation for the alarm function, the sender should be entered the sender’s email address,recipient 1、2、3、4 is filled with recipient E-mail address;SMTP server should be filled with the sender email SMTP server,e.g. the sender email address is abc@163.com,and enter mail.163.com.
password, FTP upload directory,FTP mode,FTP mode has two options: PORT and POSV. If needs a quick upload image, then select it, edit upload image interval(second) 3.5.7. Alarm Service Settings As shown below, there are two modes of alarm trigger, first one is motion detection, please refer to below interface,the sensitivity of motion detection can be adjusted according to the users′...
3.5.8 Record&Capture Path This sector is for Record&Capture Path in your computer.It include: Record&Capture Path, Record file length(MB), Record time length(Minute), Reserved disk space(MB), Record cover. Figure 3.34 3.5.9 Reset/Firm Ware Upgrade This sector is for camera firmware upgrade, it includes device system firmware and device application firmware Be cautious to apply for it! Figure 3.35...
3.5.9.1 Restore Factory Settings When users forget password, we can restore ex-factory settings, when click, a picture will pop up, Click ok, and wait for 1 minute and you can use it normally. User setting feature restores Figure 3.35 3.5.9.2 Reboot Equipment Click restart, it appears the above picture, click ok, wait for 1 minute and you can use it normally Figure 3.36...
Page 34
range of warranty. You could ask repair depend on the card. We only charge for changed components, the maintenance charge is free. c) When the products need maintenance, hand up the card with products to the manufacture or local distributor. d) Take apart item crust, tear up the sealing label privately, this is out of warranty range.