Table of Contents
Advertisement
This option resets all main menu options to factory default.
This option opens the camera's recording functionality menu.
This option takes a snapshot of the current screen and saves the snapshot to the
PC's Hard Drive.
This option enables User-to Camera audio. If the online user
This option enables Camera-to-User audio. If the online user has speakers connected
and configured to their PC, clicking this option will allow them to hear audio from the
location of the camera.
This button opens the IP camera's Backend Menu
These options enable single view, quad screen view, or 9 screen view:
This function serves no purpose unless you have more than one camera connected and
configured to your interface.
* Please refer to section 8.1.1 Multi-Device Settings*
Open and close the infrared function.
3.5. Administer Setting Instruction
When login as Administrator, you can enter the IP Camera for Administrator.
Administrator supports all the settings and operations of the camera; you can set and
control it freely There are some special functions only for administrator as below
Alias setting : You can set your favorite device aliases.
Date&Time set : seting the date and time.
Uer settings : Can be set up to 8 users. On this page you can set up accounts of the user name,
password, as well as in their packet (administrator, operator, visitor).
�
Visitor : In this mode, you can only visit.
�
Operator :You can set the direction of the lens device, set the video screen's brightness,
contrast and other parameter.
�
Administrator : You can set the device advanced configuration.
UPnP set :If you want internet access IPCAM, to ensure that the state is successful UPnP.
Device Firmware Upgrade: The system firmware update the device firmware and application of
Restore factory settings : When there is not a response when the error occurred, you can
restore the factory settings to resolve the device.
I rebooted the device : rebooted the device.
Back: Return to monitor mode
3.5.1 Multi-Device Settings
�
Add a local area network equipment
In the multi-device configuration page, you can see all the equipment inside the LAN.
The first device is the default device. You can add more devices listed in the list of
This setting changes the image frequency.
This setting changes the image brightness.
This setting changes the image contrast.
，
IR On
IR OFF
16
:
Advertisement
Table of Contents
