Key Functions - Humminbird Onix Quick Start Manual

ONIX ION
GO TO
MARK
PILOT
STANDBY
© 2014 Johnson Outdoors Marine Electronics, Inc. All rights reserved.

Key Functions

Press the POWER key to power on the control head. Press and hold the
POWER key to power off.
Press the ENTER key to start a command or turn on a setting. The ENTER
key also opens the Info menu and the Cursor menu.
Press the EXIT key once to close a menu, close a dialog box, turn off an
alarm, or exit Cursor mode. Press and hold the EXIT key to close all menus
at once.
Move the Joystick to select a view, tool, or menu. Press the Joystick to
open your selection. The Joystick is also used to move the cursor across
the view and pan 2D/3D chart views.
Turn the Rotary dial to adjust menu settings.
GO TO/Screen Snapshot key: Press this key once to open the Go To menu
for navigation functions. Press and hold this key to save the screen image.
Press the PANE key to open the View Options menu or to select a pane in
a multi-pane view.
MARK/MAN OVERBOARD key: Press and hold this key to start Man
Overboard Navigation. To mark waypoints, press this key twice.
Press the HOME key to display the Home screen. The Home screen allows
you to access settings, alarms, views, and tools for the control head.
For a closer view, press the ZOOM IN (+) key. For a wider view, press the
ZOOM OUT (-) key. Press and hold the ZOOM OUT (–) key to zoom out all
the way.
MENU key: To open the X-Press Menu for the on-screen view and operation
mode, press the MENU key once. To open the Main Menu (Settings tool),
press the MENU key twice.
ARROW keys: With a view displayed on-screen, press each arrow key
repeatedly to see the next view/previous view. Next View: Press the RIGHT
ARROW key. Previous View: Press the LEFT ARROW key.
PILOT/STANDBY key (ION only): Use the PILOT/STANDBY key if there is an
autopilot connected to the system. See the operations manual for
configuration details.
10