What You Need; Before You Begin - Seagate Medalist 1721 Installation Manual

Medalist 1721, 1010, Rev. B

What you need

•
Straight-edge and Phillips screwdrivers
•
Four 6-32 UNC drive mounting screws
•
An ATA host adapter and interface cable (max length: 18
inches) with enough connectors for all your drives
•
An unused drive power cable for your new drive
•
A bootable DOS system diskette (Seagate recommends using
DOS Version 5.0 or later.)
•
If you are mounting this 3.5-inch drive in a 5.25-inch drive bay,
you need a mounting adapter or frame kit. Also, you may need
drive mounting rails if your drive bay is not designed for direct
mounting.

Before you begin

•
Make sure your computer is turned off before you open the
case.
•
Read the handling precautions following and inspect the drive
to make sure that it is not damaged.
•
Save your foam-lined Seagate
approved this box for shipping a Seagate disc drive. Using any
other container or packing material voids your drive warranty.
®
disc drive box. Seagate has
1