What You Need; Before You Begin - Seagate Medalist 8421 Installation Manual

2 Medalist 8421, 6421, 4311 and 2112, Rev. A

What you need

•
Straight-edge and Phillips screwdrivers
•
Four 6-32 UNC drive mounting screws
•
A standard 40-pin ATA interface cable, or
an 80-conductor cable if your system runs Ultra DMA mode 3
or 4 (max length: 18 inches)
•
An unused drive power cable for your new drive

Before you begin

•
Make sure your computer is turned off before you open the
case.
•
Read the handling precautions at the right and inspect the
drive to make sure that it is not damaged.
•
Save your foam-lined Seagate disc drive box. This box has
been approved by Seagate for shipping a Seagate disc drive.
Using any other container or packing material voids your drive
warranty.