Table of Contents
Advertisement
Medalist 1721, 1010, Rev. B
Drive
ST31721A
LBA addressing
CHS addressing
ST31010A
LBA addressing
CHS addressing
Note. This drive does not use the write precomp or landing
zone parameters. Set these parameters to zero.
Recommendation
After your configure your computer, we recommend that you use
Disk Manager to partition and format your drive. If your computer
was built before mid-1994, you probably will not be able to
access the full capacity of your new drive unless you use Disk
Manager . See page 13 for information on Installation using Disk
Manager .
If you do not want to use Disk Manager, you can use the stan-
dard DOS commands to partition and format your drive, as
described on page 15.
Cylinders
Heads
826
64
3,303
16
524
64
2,098
16
9
Sectors
63
63
63
63
Advertisement
Table of Contents
