Instructions For Maintenance And Service - CYBEX Onyx User Manual

Hide thumbs Also See for Onyx:
Table of Contents

Advertisement

WarNING
THIS PRoDUCT IS NoT SUITaBLE FoR RUNNING oR
SKaTING.
– To attach an additional full harness system for safety reasons 'D' rings (according to
EN13210 or BS6684) are provided.
– The child should be clear of any moving parts while making adjustments. Prevent
children from grabbing the stroller while folding and unfolding, as fingers can become
trapped and scissoring actions are unavoidable.
WarNING
aNY LoaD aTTaCHED To THE HaNDLES aFFECTS THE
STaBILITY oF THE STRoLLER.
Do not carry additional children, do not hang shopping bags from the handlebars or carry
shopping bags on the stroller except in the stroller's basket. Maximum load 2 kg. Otherwise
the stroller is likely to become unstable. Overloading can also damage the vehicle.
Maximum load canopy bag 0,5 kg.
– Damages caused by the use of accessories not approved by CYBEX, such as rain
covers, buggy boards, bag hooks, etc. will not be covered by the terms of our warranty.
– It may be unsafe to use replacement parts other than those approved by CYBEX.
– Before using the stroller, always check whether the accessories are well secured.
– Ensure that the stroller is always in the brake position when you put and remove your
child into the seat.
– Never lift the stroller with the child inside; never ascend or descend stairs or escalators
with the child inside or when traveling on other forms of transport.
– When opening and closing the stroller, do not use force, as incorrect folding can
damage or break the stroller. Check the instruction manual if necessary.
– Drive carefully over curbs and gravel roads. The vehicle will be damaged by repeated
impact.
– Make sure your child does not use the footrest to stand on.
– Do not expose the stroller to any artificial heat or direct sunlight.
II. INSTRUCTIoNS FoR maINTENaNCE
– The user is responsible for the regular maintenance of the stroller. All connecting
parts and rivets have to be tightened and secured properly. It is particularly important
to ensure that the locking mechanism and swiveling mechanism are treated regularly
with Teflon spray (dry lubricant). It is important that brakes, wheels and tyres are not
impaired during use. Inspect them regularly and repair or replace if necessary. STOP
using any product that does not appear structurally sound.
– Do not make any modifications to the product. If you have any complaints or problems,
please contact your supplier or importer.
– A service should be scheduled every 12 months.
– You can also treat the other moving parts with Teflon spray (dry lubricant). After
spraying on the Teflon, wipe the product with a soft cloth.
– Use only original CYBEX replacement parts. It may be unsafe to use substitutes.
– The frame tubes covered by the locking mechanism and turning mechanism should also
be regularly cleaned and sprayed. This will ensure that you enjoy your stroller without
any problems.
CLEaNING
– Do not use abrasives to clean the frame! Use a damp cloth and a mild detergent and
dry thoroughly.
– Should the stroller be exposed to salt water, please rinse it down with fresh (tap) water
as soon as possible afterwards. The seatcover and the canopy can be washed by hand
with mild detergent (not warmer than 30°C).
– The seatcover is maschine washable (See care label for details). Do not use the tumble
drier. Dry thoroughly before reuse.
– All CYBEX fabrics have been tested, but when the stroller is very wet, the water may
permeate the lining through the bottom edges and seams and leave water stains on the
upholstery. We advise you to use a rain cover to avoid this. Also please do not fold or
store the product while wet. If the stroller is wet, allow to dry with the hood extended.
Never store in a damp environment as this can cause mildew to form.
Note! Please wash the cover separately before you use it the first time. Do not tumble dry
and do not expose to direct sunlight! Do not iron!
SERVICE
In general the Cybex pushchairs will run smooth without any problems. A dry and/or dusty
environment can have a negative effect on the wheel systems. To avoid this it is very
important that the wheel systems will be regularly checked, cleaned and lubricated. This will
ensure a smooth operation of the stroller in daily use. Please follow the instruction below to
maintain the wheel systems (wheel axles & suspension system).
II.-I Check of wheel systems
a) Wheel system must be cleaned before applying the lubricant.
b) Wheel system must not be broken or damaged.
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Topaz

Table of Contents