Table of Contents
Advertisement
With the aid of the following guide, minor problems can be fixed without a service
call.
,
Repairs should only be carried out by a qualified and trained person in ac-
cordance with local and national safety regulations. Unauthorized repairs could
cause personal injury or machine damage.
38
The door is not properly
closed.
The machine is not
plugged in.
The fuse is defective or
the breaker has tripped.
The program selector is
set to "Stop".
The fuse or breaker has
tripped.
The intake water has not
reached the required tem-
perature of 115 °F/45 °C,
the hot water system may
be overloaded, see "Pro-
gram guide".
Close the door firmly.
Insert the plug.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
– Turn the program selec-
tor to the desired pro-
gram.
– Press the "Start" button.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
– Start the program
again.
– If the indicator light co-
mes on again, select a
different program.
Advertisement
Table of Contents
