Miele LaPerla G 2830 SCi Operating Instructions Manual page 60

Frequently asked questions
Issue
Dishes are not dry,
glasses and
cutlery are
spotted?
White residue is
visible on cutlery
and dishes,
clouding occurs on
glassware and film
can be wiped off.
60
Possible fault
The rinse aid setting may
be too low or the rinse aid
reservoir is empty.
Dishes were taken out too
soon.
"2 in 1" or "3 in 1" products
were used. These products
have a low drying effect.
The detergent "2 in 1" or
"3 in 1" is set, but another
product was used.
Not enough rinse aid was
used.
The salt container is empty. Refill salt, see "Before using
Unsuitable "2 in 1" or "3 in 1"
products were used.
The automatic water
softener unit is defective.
Solution
Increase the dosage, refill the
reservoir or switch the rinse
aid product when refilling, see
"Before using for the first
time".
Leave dishes in longer, see
"Use".
Set the detergent type to
"Powder" and insert rinse aid.
See "Settings J - Detergent".
Select the detergent setting to
the detergent used. See
"Settings J - Detergent".
Increase the dosage. See
"Settings J - Rinse aid".
for the first time".
Use a different detergent.
Try normal tabs or powder
detergent.
Call Miele Technical Service.