Miele HG01 Installation Instructions Manual page 14

To ensure stability this dishwasher
should be securely attached to the
countertop with the two mounting
brackets included.
^ Insert the tab of each bracket into the
guide holes on top.
Do not install these mounting brackets
if the counter is made of an extremely
hard material. The securing screws for
the mounting brackets are not suitable
for such materials.
14
Two slide skis are included and should
be installed on the feet of the
dishwasher before the machine is
pushed under the countertop. This will
allow the machine to slide easier,
protect the floor, and allow adjustment
of the rear leveling legs from the front of
the unit.
^ First, adjust the height of the legs so
that the top of the dishwasher is
1
roughly / " (3 mm) below the
8
countertop.
Tipping the machine slightly to the rear,
if possible, will make adjusting the front
legs easier. Make sure the machine is
level when adjustments are complete.
^ Place the skis, with the ratchet at the
rear, under the dishwasher legs.