Miele HG01 Installation Instructions Manual page 13

The steam deflector is not required for
countertops made of solid, waterproof
material. But it is needed for
determining the correct position of the
optic indicator reflector.
^ Remove the black plastic reflector
holder and the tape holding it in
place from the steam deflector.
^ With the reflector cut out left and
frontward, align the steam deflector
with the front edge of the counter.
Trace the outline of the reflector onto
the underside of the counter with a
pencil.
Note:
For rounded countertops, make the
tracing closer to the counter's edge so
the optic reflection will be visible.
^ Adhere the double-sided sticker to
the back of the optic indicator
reflector.
^ Remove the backing from the other
side of the sticker.
^ Line up the black reflector holder with
the tracing and press into place.
^ Press the optic indicator reflector into
the reflector holder.
The "Extended drying" feature can
be activated to further protect the
counter from condensation. See the
"Operating instructions / Additional
features".
13