Checking The Programmed Water Hardness - Miele Platinum G 892 Operating Instructions Manual

^ Press the program seletion button %
(19) until the "Rinse" (16) indicator
flashes.
This is the second program level.
^ Use the program selection buttons
(19) to select the program which
corresponds to the water hardness in
your area.
23 - 35 410 - 630
36 - 70 650 - 1260
The selected program indicator (14)
and the "Rinse" (16) indicator will flash.
To store the programmed water
hardness:
^ Press the "Start/Stop" button (17)
twice.
^ Turn off the dishwasher.
16
^ Make sure the dishwasher is turned
^ Press and hold the "Start/Stop" button
The programmed water hardness will
be indicated by:
Pots & Pans
Lit program indicator (see table1).
Sani Wash
Lit "Rinse" (16) indicator.
Lit program indicator (see table 2).
Flashing "Rinse" (16) indicator.
^ Turn off the dishwasher.
off.
(17) and at the same time turn on the
dishwasher with the "On/Off" button
(13). Release the "Start/Stop" button
within two seconds.