Adding Detergent - Miele Platinum G 892 Operating Instructions Manual

38
The spray arm is hitting
an item in the basket.
Items are not secure in
the wash cabinet.
This may be caused by
the installation or the
diameter of pipe.
The rinse aid setting may
be too low, or the rinse aid
reservoir is empty.
Extended drying is not
activated.
Dishes were taken out too
soon.
The dishes were not
loaded correctly.
The program was not
powerful enough.
Not enough detergent
was dispensed.
The spray arm jets are
clogged.
The triple filter is clogged
or not correctly seated.
The non-return valve is
blocked while open.
Water runs back into the
wash cabinet.
Interrupt the program,
rearrange items blocking
the spray arms.
Interrupt the program and
rearrange loose pieces.
This has no effect on the
dishwasher. If in doubt
contact a plumber.
Increase the dosage or
refill the reservoir, see
"Before using for the first
time".
Activate the Extended
drying feature.
Leave dishes in longer.
See "Loading the
dishwasher".
Select a more intensive
program, see "Program
guide".
Use more detergent, see

"Adding detergent".

Clean the spray arm jets,
see maintenance
instructions.
Clean and reseat the filter,
see maintenance
instructions.
Clean the drain pump and
the non-return valve, see
maintenance instructions.