Miele Novotronic G 851 SC Plus Operating Instructions Manual page 40

Frequently asked questions
What if ...
the "End", "Start" and
"Top Solo" indicators
flash at the same time at
the end of a program?
there is a knocking
noise in the wash
cabinet?
there is a rattling noise? Items are not secure in
there is a knocking
noise in the water
pipes?
the dishes are not dry,
glasses and cutlery are
spotted?
40
Possible fault
There may be a technical
fault.
The spray arm is hitting
an item in the basket.
the wash cabinet.
This may be caused by
the installation or the
diameter of pipe.
The rinse aid setting may
be too low, or the rinse aid
reservoir is empty.
Extended drying is not
activated.
Dishes were taken out too
soon.
Fix
– Turn the program
selector to "Stop".
– Turn off the dishwasher.
A few seconds later:
– Turn the dishwasher on.
– Select the desired
program.
– Press the "Start" button.
If the indicators flash
again, there is a technical
problem.
– Call the Miele Technical
Service Department.
Interrupt the program,
rearrange items blocking
the spray arms.
Interrupt the program and
rearrange loose pieces.
This has no effect on the
dishwasher. If in doubt
contact a plumber.
Increase the dosage or
refill the reservoir, see
"Before using for the first
time".
Activate the Extended
drying feature.
Leave dishes in longer.