Panasonic DMC-L1K Operating Instructions Manual page 79

∫ Setting and effect
• [STANDARD] (COLOUR)
This is the standard setting.
• [DYNAMIC] (COLOUR)
The saturation and contrast of the stored
colours are increased.
• [NATURE] (COLOUR)
Brighter red, green and blue. Enhanced
beauty of nature.
• [SMOOTH] (COLOUR)
The contrast is lowered for smoother and
clearer colour.
• [STANDARD]
This is the standard setting.
• [DYNAMIC] (B&W)
The contrast is increased.
• [SMOOTH] (B&W)
Smooths the picture without losing the
skin texture.
• [MY FILM1]
• [MY FILM2]
The saved setting is used. (P90)
• In film mode, the camera may do
something equivalent to pull processing to
create a picture with particular
characteristics. The shutter speed may
become very slow at this time.
∫ Adjusting each film mode to the
1 Press 1 several times on the
2 Press 3/4 to select an item, use
(B&W)
3 Press 3/4 to select the item and
4 Press [MENU/SET] to close the
desired setting
screen shown in step 2 on
page 78.
the command dial A to adjust it
and then press [MENU/SET].
ADJUST.
STANDARD
CONTRAST
SHARPNESS
SATURATION
NOISE RED.
CANCEL SELECT
• The message [SAVE THIS
SETTINGS?] appears.
then press [MENU/SET].
ADJUST.
SAVE THIS SETTING ?
NO,USE AS TEMP. SET
OVERWRITE MY FILM 1
OVERWRITE MY FILM 2
SELECT
• You can save 2 user settings ([MY
FILM1] and [MY FILM2]).
• [FILM MODE] is displayed as [TEMP.]
on the LCD monitor if you select [NO,
USE AS TEMP. SET]. The display
disappears and the setting is cancelled
if the camera is turned off and then on
again.
menu.
Menu Settings
A
MENU
SET
MENU
SET
MENU
MENU
SET
SET
79
VQT0W88