Taking Pictures Using The Built-In Flash - Panasonic DMC-L1K Operating Instructions Manual

Taking Pictures using
the Built-in Flash
∫ Open the flash
OPEN] button A.
Press the [
A
• If you press the [ OPEN] button lightly,
the flash will open to the bounce flash
position B. If you press the [ OPEN]
button fully, the flash will open to the
normal flash position C.
• Use the flash in the normal flash position
when taking pictures with the flash normally.
∫ Close the flash
1: Press the flash down until it locks into
the bounce flash position.
2: Close the flash firmly.
• This camera is compatible with bounce
flash so the flash opens and closes in two
steps.
Refer to P65 for information about the
bounce flash.
B
• Be sure to close the flash when not in use.
∫ Switching to the appropriate flash
Set the flash to match the recording.
1 Press [ ] D.
C
2 Rotate the command dial G and
setting
P
STANDARD STANDARD
WB WB
AUTO AUTO
ISO ISO
100 100
SINGLE SINGLE
E
F
P
AUTO
E: Viewfinder Display
F: When taking pictures with Live View
select the flash setting.
P
STANDARD STANDARD
WB WB
AUTO AUTO
ISO ISO
100 100
SINGLE SINGLE
• Refer to "Available flash setting by
recording mode" on P62 for information
about the flash settings for the built-in
flash that can be selected.
• Refer to P86 for setting the 1st and 2nd
curtain.
Advanced
CUSTOM CUSTOM
NORMAL NORMAL
19 19
D
ISO ISO
100 100
STD STD 19 19
G
CUSTOM CUSTOM
NORMAL NORMAL
19 19
61
VQT0W88