Panasonic DMC-L1K Operating Instructions Manual page 102

Connecting to other equipment
[Macintosh]
The drive is displayed on the screen.
• The drive is displayed as [NO_NAME] or
[Untitled].
∫ Folder Composition
Folders are displayed as shown in the
following illustration.
≥SD Memory Card
≥SDHC Memory Card
≥MultiMediaCard
1 Folder number
2 Colour space
P: sRGB
_: AdobeRGB
3 File number
4 JPG: pictures
RAW: RAW files
• Refer to P81 for information about
recording RAW files on this unit.
The items in each folder are as follows.
[DCIM] Folders from [100_PANA] to
[999_PANA]
[100_PANA] Pictures/RAW files
to
[999_PANA]
[MISC] Files on which the DPOF
print settings are recorded
• The data for up to 999 pictures recorded
by the camera can be included in 1 folder.
If the number of pictures exceeds 999,
another folder is created.
102
VQT0W88
• To reset the file number or the folder
∫ Conditions under which a different
The picture is not recorded in the same
folder as the previously recorded picture in
the following cases. It is recorded in a folder
DCIM
with a new number.
100_PANA
1 When the folder just recorded to contains
1
100_PANA
2 When the card just recorded to contains,
P1000001.JPG
2 3 4
P1000002.JPG
P1000999.JPG
101_PANA
999_PANA
MISC
3 When recording after selecting
∫ PictBridge (PTP) setting
Even if you set [USB MODE] to
[PictBridge (PTP)], you can connect to your
PC if the OS is "Windows XP Home
Edition/Professional" or "Mac OS X".
• Pictures can only be read on the camera.
• When there are 1000 or more pictures on
number, select [NO.RESET] in the
[SETUP] menu. (P31)
folder number is used
a picture file with the number 999 in it
(example: P1000999.JPG).
for example, a folder with the number
100 [100_PANA] in it and that card is
removed and replaced with a card that
has a folder with the number 100 in it
recorded by a camera from a different
maker (100XXXXX, with XXXXX being
the name of the maker) and then a
picture is recorded.
[NO.RESET] (P31) from the [SETUP]
menu. (Pictures will be recorded to a
new folder with a number sequential to
the folder recorded to immediately
before. By using [NO.RESET] on a card
that does not contain folders or pictures,
such as one just formatted, the folder
number can be reset to 100.)
They cannot be written to a card or
deleted.
a card, the pictures may not be imported.