Adjusting The Flash Output - Panasonic DMC-L1K Operating Instructions Manual

Advanced
• The red-eye reduction effect differs
between people. Also, if the subject was
far away from the camera or was not
looking at the first flash, the effect may not
be evident.
• When the flash is being charged, the flash
icon blinks red, and you cannot take a
picture even when you press the shutter
button fully.
• When taking pictures in burst mode or
auto bracket, only 1 picture is recorded for
every flash activated.
• If you take pictures with the flash when
the lens hood is attached, the flash
may be obscured by the lens hood.
• When you attach an external flash, it takes
priority over the built-in flash. Refer to
P108 for the external flash.
64
VQT0W88

Adjusting the flash output

Adjust the flash output when the subject is
small or reflection ratio is extremely high or
low.
1 Press [
] A.
P
STANDARD STANDARD
WB WB
-2 -1 0
AUTO AUTO
ISO ISO
100 100
SINGLE SINGLE
B
B: When taking pictures with Live view
2 Rotate the command dial C to
adjust the flash output.
P
STANDARD STANDARD
WB WB
-2 -1 0
AUTO AUTO
ISO ISO
100 100
SINGLE SINGLE
D
D: When taking pictures with Live view
• Rotate the command dial upwards to
adjust towards negative and rotate the
command dial downwards to adjust
towards positive.
• You can adjust from [`2 EV] to [_2 EV]
in steps of [1/3 EV].
• Select [0] to return to the original flash
output.
• The flash output adjustment value E is
displayed on the LCD monitor when
taking pictures with Live View.
+1 +1 +2 +2
CUSTOM CUSTOM
NORMAL NORMAL
A
19 19
+1 +1 +2 +2
C
CUSTOM CUSTOM
NORMAL NORMAL
19 19