Asus Motherboard P4V800-X User Manual page 15

ATX 12V connector. This power connector connects the 4-pin 12V plug from
1
the ATX 12V power supply.
2
CPU socket. A 478-pin surface mount, Zero Insertion Force (ZIF) socket for
®
the Intel Pentium
bus that allows 6.4GB/s, 4.3GB/s, and 3.2GB/s data transfer rates,
respectively.
North bridge controller. The VIA
3
with 800/533/400 MHz frequency, system memory interface at 400/
333/266MHz operation, and 1.5V/0.8V AGP interface that supports AGP 3.0
specification including 8X Fast Write protocol.
DDR DIMM sockets. These three 184-pin DIMM sockets support up to 3GB
4
system memory using unbuffered non-ECC PC3200/2700/2100 DDR DIMMs.
ATX power connector. This 20-pin connector connects to an ATX power
5
supply. The power supply must have at least 1A on the +5V standby lead
(+5VSB).
IDE connectors. These dual-channel bus master IDE connectors support
6
Ultra DMA133/100/66, PIO Modes 3 & 4 IDE devices. Both the primary (blue)
and secondary (black) connectors are slotted to prevent incorrect insertion of
the IDE ribbon cable.
AGP 8X slot. This Accelerated Graphics Port (AGP) slot supports 1.5V/0.8V
7
AGP 8X/4X mode graphics cards for 3D graphical applications.
SATA connectors. These connectors support Serial ATA HDDs and allow
8
up to 150MB/s data transfer rate using thin 4-conductor SATA cables.
South bridge controller. The VIA
9
supports various I/O functions including two Serial ATA ports, 2-channel
ATA/133 bus master IDE controller, up to eight USB 2.0 ports, LPC Super
I/O interface, AC'97 interface and PCI 2.2 interface.
Floppy disk connector. This connector accommodates the provided ribbon
10
cable for the floppy disk drive. One side of the connector is slotted to prevent
incorrect insertion of the floppy disk cable.
Standby power LED. This LED lights up if there is a standby power on the
11
motherboard. This LED acts as a reminder to turn off the system power
before plugging or unplugging devices.
Flash ROM. This 4Mb firmware contains the programmable BIOS program.
12
Super I/O controller. This Low Pin Count (LPC) interface provides the
13
commonly used Super I/O functionality. The chipset supports a high-
performance floppy disk controller for a 360K/720K/1.44M/2.88M floppy disk
drive, a multi-mode parallel port, two standard compatible UARTs, and a Flash
ROM interface.
Audio CODEC. The ADI 1980 is an AC'97 CODEC that allows 6-channel
14
audio playback.
ASUS P4V800-X motherboard user guide
® ®
4 or Celeron processors, with 800/533/400 MHz system
®
PT800 provides the processor interface
®
VT8237 integrated peripheral controller
1-5