Installing The Battery Packs - Traxxas XMaxx 77076-4 Owner's Manual

INSTALLING THE BATTERY PACKS

1
1. Pull out on the battery hold-down using the two release tabs and lift the
hold-down up.
2. Insert a fully charged battery into the battery compartment with the High
Current Connector positioned toward the front of the model.
Note: When using lower capacity battery packs, such as the Traxxas 5000, snap
the included spacers to the battery hold-downs.
3. Lower the battery hold-down and push it in toward the center of the truck
to snap it closed.
4. Repeat for the opposite battery.
The Traxxas High-Current Connector
Your model is equipped with the Traxxas High-Current
Connector. Standard connectors restrict current flow
and are not capable of delivering the power needed
to maximize the output of the VXL-6s. The Traxxas
connector's gold-plated terminals, with large contact
surfaces, ensure positive current flow with the least amount of resistance. Secure,
long-lasting, and easy to grip, the Traxxas connector is engineered to extract all the
power your battery has to give.
TRAXXAS TQ
2
RADIO & VELINEON POWER SYSTEM
i
Battery iD
Traxxas recommended
battery packs are equipped
with Traxxas Battery iD. This
exclusive feature allows
Traxxas battery chargers (sold
separately) to automatically
recognize connected battery
packs and optimize the
charge settings for the
battery. This eliminates
the need to worry over
charger settings and menus
for the easiest and safest
charging solution possible.
Visit Traxxas.com to learn
more about this feature and
available Traxxas iD chargers
and batteries.
Battery Compartment Specs:
• 197mm (7.75") long
x 51.5mm (2.03") wide
• Height with stock strap:
45mm (1.77")
• Height with included
hold-down spacer:
28.5mm (1.12")
4
X-MAXX • 13