Tools, Supplies, And Required Equipment - Traxxas XMaxx 77076-4 Owner's Manual

For more information on
batteries, see Use the Right
Batteries on page 12.
Recommended Equipment
These items are not required
for the operation of your
model, but are a good idea to
include in any R/C toolbox:
• Safety glasses
• Traxxas Ultra Premium Tire
Glue, Part #6468 (CA glue)
• Hobby knife
• Side cutters and/or needle
nose pliers
• Phillips screwdriver
• Soldering iron
6 • X-MAXX

TOOLS, SUPPLIES, AND REQUIRED EQUIPMENT

Your model comes with a set of specialty metric tools. You'll need to purchase other items, available from your hobby dealer, to operate
and maintain your model.
Supplied Tools and Equipment
2.5mm "T" 2.5mm "L"
wrench wrench
Required Equipment
Traxxas Power Cell LiPo Battery
(part #2972X or #2878X,
sold separately)
2 batteries with Traxxas
High-Current Connectors
(Traxxas Power Cell LiPo batteries
recommended)
REMOVING AND INSTALLING THE BODY
Your X-Maxx includes an innovative latching system for
securing the body to the chassis. To remove the body for
chassis access:
1. Turn the handle 90 degrees counterclockwise to unlock the
body latch.
2. Open the latch to release the truck body from the rear
shock tower.
3. Gently lift the rear of the body. Do not lift too far or the body
will become difficult to remove.
4. Slide the body backward away from the front shock tower
to release the front body tab. (Installation of the body is the
reverse of removal.)
5. Practice this a few times until you become familiar with
the latching mechanism. The more you do it, the faster you
will be.
*Battery and charger style are subject to change and may vary from images.
2.0mm "L" 17mm wheel nut
wrench wrench
EZ-Peak ™ Dual
(part #2972,
sold separately)
LiPo battery charger
Battery spacers Slipper clutch
wrench
Traxxas Power Cell Batteries
(part #2914,
sold separately)
4 AA alkaline
batteries