Other Problems - Miele NOVOTRONIC T 7644 C Operating Instructions Manual

Other problems

Problem
The drying
process goes on
too long or even
switches off.
Even after the lint
screen is
cleaned, the
Filter/Vent
indicator come
on.
The laundry was
not satisfactorily
dried.
Cause
Please check all possible causes and switch the dryer
off and then on again.
Insufficient ventilation,
perhaps because the
installation space is too
small. As a result, room
temperature may rise.
The ventilation inlets beneath
the door are closed.
Lint screens are plugged
with lint or have been put
back wet after cleaning.
Detergent residues, hair and
fine lint may block the
condenser.
Laundry was insufficiently
spun.
The dryer is overloaded.
Metal components such as
zippers have prevented the
moisture level of the laundry
from being determined
accurately.
The load consists of various
fabrics.
Trouble shooting
Solution
Open the door or window, to
prevent room temperature
from rising.
– Remove the blocking
objects.
– Remove the lint.
– Lint screens must be dry.
Inspect and clean the
condenser from time to time.
In future, spin textiles in the
washer at a higher rpm.
Verify the maximum load for
each drying program.
– In future, open the zippers.
If the problem recurs, in
future dry garments with long
zippers using the Warm air
program.
– Re-dry with warm air.
– Next time, select a suitable
program.
31