Security - Asus Motherboard A8V-XE User Manual

Asus a8v-xe motherboard user manual
Table of Contents

Advertisement

OS Select for DRAM > 64MB [Non-OS2]
Set this item to OS2 only when you are running on an OS/2 operating
system with an installed RAM of greater than 64 KB.
Configuration options: [Non-OS2] [OS2]
Full Screen LOGO [Enabled]
Allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Make sure that the above item is set to [Enabled] if you want to use the
ASUS MyLogo™ feature.
Halt On [All, But Keyboard]
Allows you to error report type.
Configuration options: [All Errors] [No Errors] [All, But Keyboard]
[All, But Diskette] [All, But Disk/Key]
2.6.5

Security

Boot Settings Configuration
Supervisor Password
User Password
Password Check
Supervisor Password
User Password
These fields allow you to set passwords:
To set a password:
1.
Select an item then press <Enter>.
2.
Type in a password using a combination of a maximum of eight (8)
alpha-numeric characters, then press <Enter>.
3.
When prompted, confirm the password by typing the exact characters
again, then press <Enter>. The password field setting is changed to
Set.
ASUS A8V-XE
Phoenix-Award BIOS CMOS Setup Utility
Boot
Clear
Clear
[Setup]
Select Menu
Item Specific Help
Supervisor password
controls full access,
<Enter> to change
password.
2-33

Advertisement

Table of Contents
loading

Table of Contents