Bobbin Winding - Royal EVA 8700 Instruction Manual

BOBBIN WINDING

REMOVING THE BOBBIN
1. Remove the bobbin cover by sliding the
release lever to right and push down
the left corner of bobbin cover at the
same time.
2. Remove the bobbin from the machine.
BOBBIN WINDING
1. Place a spool of thread onto the spool-
pin and put the spool cap on it.
2. Pass thread through the thread guide.
3. Pass thread through the bobbin winder thread guide.
4. Pass thread from spool through thread guides as shown.
5. Twist thread round the bobbin a few times.
6. Place the bobbin on bobbin winder-
spindle and push to the right to engage.
Bobbin winder will appear on L.C.D
when ready for winding.
1
2.5 00 1
3.5
7. Start the sewing machine.
8. Set the speed control to maximum.
9. The bobbin winding will stop when
bobbin is full.
10. Push the bobbin and spindle to the
left. Remove the bobbin from the
spindle and cut the thread.
16
2