Sim - HP Compaq 6735b Maintenance And Service Manual

SIM

NOTE:
in the SIM slot, it should be removed before disassembling the computer. Be sure the SIM is reinserted
in the SIM slot after reassembling the computer.
Before removing the SIM, follow these steps:
1.
2.
3.
4.
Remove the SIM:
1.
2.
Reverse this procedure to install the SIM.
48 Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com
This section applies only to computer models with WWAN capability. If there is a SIM inserted
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
Remove the battery (see Battery on page
Press in on the SIM (1). (The module is partially ejected from the SIM slot.)
Remove the SIM (2) from the SIM slot.
manuals search engine
47).