Removing The Usb/Power Connector Board - HP Pavilion dv6000 Maintenance And Service Manual

Notebook pc
Hide thumbs Also See for Pavilion dv6000:
Table of Contents

Advertisement

www.DataSheet4U.com
Removal and Replacement Procedures
2. Remove the two Phillips PM2.5×5.0 screws 1 that secure the
USB/power connector board to the computer.
3. Release the USB/power connector board 2 as far as the
USB/power connector board cable will allow.
4. Disconnect the USB board cable 3 and the power connector
board cable 4 from the USB/power connector board.

Removing the USB/Power Connector Board

5. Remove the USB/power connector board.
Reverse the above procedure to install the USB/power
connector board.
5–60
Maintenance and Service Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents