www.DataSheet4U.com
❏
❏
❏
❏
2. Turn the system board upside down with the expansion
port 3 and external monitor port toward you.
3. Disconnect the fan cable 1 from the system board.
4. Remove the four Phillips PM2.5×5.0 screws 2 that secure the
fan/heat sink assembly to the system board.
5. Remove the fan/heat sink assembly 3.
Removing the Fan/Heat Sink Assembly
Maintenance and Service Guide
Top cover
(Section
Audio board
(Section
USB/power connector board
System board
(Section
Removal and Replacement Procedures
5.15)
5.16)
(Section
5.20)
5.19)
5–67