Cannot receive calls overseas.
Is "Restricting incoming calls" set to
・
"Activate restriction"?
No caller ID is notified/a notified caller ID
is different from that of the caller/
functions for using contents saved in
phonebook or those using Caller ID
notification do not operate.
Even if a caller notifies its caller ID, it is not
・
displayed on the terminal unless the
network or network operator notifies it.
And a different caller ID may be notified
depending on the network or network
operator you use.
Data management
■
Data transfer is not performed.
Check if USB hub is used. If you use USB
・
hub, operations may not be performed
correctly.
Data saved in microSD card is not
displayed.
Remove and attach the microSD card.
・
P.169
When trying to display an image, " "
appears instead of it.
Or " " appears for the demo play or the
preview function.
" " may appear instead of destroyed
・
image data.
P.188
→
→
Bluetooth function
■
The terminal cannot be connected to a
Bluetooth communication device/A
Bluetooth communication device cannot
be found from the terminal.
Make Bluetooth communication device
・
(commercial item) registering stand-by
state and then register the device on the
terminal. If you delete already registered
device and register the device again as a
new device, delete the registrations on
both Bluetooth communication device
(commercial item) and the terminal and
then perform registration of the devices.
P.173
→
Calls cannot be made from the terminal
connecting to external device such as car
navigation or handsfree device.
If calls are made several times when the
・
other party does not answer or is out of
service, the call to this number may be
disabled. In this case, turn terminal off and
on.
Appendix/Index
197