Table of Contents
Advertisement
Power supply
■
Cannot power on the terminal.
Check if the battery is not run out.
･
Screen is frozen, the power cannot be
turned off.
When the screen freezes or the power
･
cannot be turned off, open the docomo
mini UIM card slot cover
red OFF button for approximately 3
seconds and release it when the terminal
vibrates 3 times to force stop.
Alternatively, press
key simultaneously for approximately 3
seconds and release them when the
terminal vibrates 3 times to force stop.
P.36
* Note that some data and settings may be
erased due to force-quit operation.
Charging
■
Cannot charge (The notification LED does
not turn on, or the icon does not indicate
charging status.)
Check if the adapter's power plug or
･
cigarette lighter plug is correctly inserted
to an outlet or cigarette lighter socket.
Check if the adapter cable and the
･
terminal are set correctly.
P.31
→
u
Press and hold
P
and volume up
→
P.34
→
When using the AC Adapter 04 (optional),
･
check if the microUSB plug of the AC
adapter is connected to the terminal or
supplied desktop holder correctly.
P.34
In case of using the desktop holder, are
･
the terminal's contacts for the desktop
holder dirty? Clean the contacts with a dry
cotton swab etc. if they are dirty.
When using Micro USB Cable 01
･
(optional), check if the PC is turned on.
If you execute calls, communications or
･
other function operations for a long time
while charging, the terminal may become
hot and the notification LED turns off
(charging stops) or battery level may
become low. In this case, wait until the
temperature of the terminal drops and
charge again.
The notification LED blinks in red and the
terminal cannot be operated.
When the battery level is low, charge the
･
battery.
P.31
→
P.32,
→
Appendix/Index
192
Advertisement
Table of Contents
