Table of Contents
Advertisement
* Compatible with Wi-Fi CERTIFIED Miracast
Depending on usage environment, image or sound
may be interrupted or stopped.
Covering around the Wi-Fi/Bluetooth antenna with
your hand may affect the quality of
communications.
Airplane mode
In this mode, the functions of using radio
wave transmissions such as calling, accessing
to the Internet (including sending/receiving
mails), etc. are disabled.
From the Home screen,
1
u
[Settings]
Mark [Airplane mode].
2
When Airplane mode is on,
･
on the status bar.
❖ Information
Alternatively, press and hold
･
Tap [Airplane mode] to set Airplane mode to on/off.
Even if Airplane mode is on, Wi-Fi, Bluetooth function
･
and NFC Reader/Writer, P2P function can be turned
on. Be careful not to use these functions in a place
where the use is prohibited such as in a airplane or
hospital.
™
u
[More...].
appears
P
for over a second
Setting an access point
An access point for connecting to the
Internet (sp-mode) is already registered. You
can add or change it if necessary.
For using mopera U, Business mopera
Internet add the access point manually.
For details on mopera U, refer to mopera U
website.
Checking the access point in use
From the Home screen,
1
u
[Settings]
networks]
It is recommended that you use the
･
displayed access point without editing.
❖ Information
When several available access points are displayed, a
･
marked radio button to the right indicates the active
u
access point.
Setting an access point additionally
From the Home screen,
1
u
[Settings]
networks]
u
[New APN].
2
[Name]
3
u
[APN]
4
u
name
u
[More...]
u
[Access Point Names].
u
[More...]
u
[Access Point Names].
u
u
Enter a name
[OK].
Enter an access point
[OK].
Settings
u
[Mobile
u
[Mobile
147
Advertisement
Table of Contents
