Operation; Main Power Switch; Setting The Cooktop; Setting The Heating Element - Bosch NET 8654 UC Use And Care Manual

Operation

Main power switch

Turning on
Turning off
Note

Setting the cooktop

Setting the heating
element
Setting the heat setting
Use the main switch to turn on the electronic circuitry for the control panel. The
cooktop is now ready to use.
Touch ON/OFF until the indicator above the main switch and the symbols $ for the
heating elements turn on.
Touch ON/OFF until the indicator above the main switch turns off. The residual heat
indicators will continue to appear until the elements have cooled off sufficiently.
The cooktop will turn off automatically if all of the elements have been turned off for
longer than 15 seconds.
If residual heat is still present when the cooktop is turned on, H/h will appear in the
heating element display.
This section explains how to set the elements. In the table, you can find temperature
settings for various foods.
Select the desired heat setting in the setting area.
Heat setting 1 = lowest power
Heat setting 9 = highest power
Each heat setting has an intermediate position.
It is indicated by . and is set using Þ.
The cooktop must be turned on.
1. Touch the symbol $ for the desired heating element.
‹ will appear in the display and the symbol $ for the selected heating element
will light up brightly.
2. With the next 10 seconds touch the desired heat setting (1 9) in the setting area.
13