Table of Contents
Advertisement
Installing a CPU
1.
Loosen the CPU fan screws.
2.
Disconnect the CPU fan cable from the
CPU fan connector on the
motherboard, then lift the CPU fan.
3.
Remove the bracket screw that
secures the chassis fan and heatsink
assembly to the rear panel.
4.
Disconnect the chassis fan cable from
the chassis fan connector, then lift the
chassis fan and heatsink assembly.
5.
Locate the 478-pin CPU socket on the
motherboard. Unlock the socket by
pressing the lever sideways then lifting
it up to a 90° angle.
6.
Position the CPU above the socket
such that its marked corner (gold mark)
matches the base of the socket lever.
7.
Carefully insert the CPU to the socket
until it fits in place.
CAUTION! The CPU fits only in one
correct orientation. DO NOT force the
CPU into the socket to prevent bending
the pins and damaging the CPU!
8.
When the CPU is in place, push down
the socket lever to secure the CPU.
9.
Re-install the chassis fan and heatsink
assembly.
10. Re-install the CPU fan.
8
1
2
4
3
6
5
7
8
9
10
ASUS DiGiMatrix (AB-V10)
Advertisement
Table of Contents
