Planet CS-2001 User Manual page 360

Step8. Policy Created.
Step9. Go to Policy Object > VPN > Trunk, click New Entry and then set as
below: （Figure 11-203）

Type the name in the Name field.

Local Settings: select LAN. Enter the local subnet and the mask.

Under the Remote Settings section, select Remote IP / Netmask and
then enter the local subnet and the mask.

Move the VPN_01 from the Available Tunnels column to the Selected
Tunnels column.

Tick Enable NetBIOS Broadcast over VPN.

Click OK.
（Figure 11-202）
Figure 11-202 Policy Created
（Figure 11-204）
Figure 11-203 Configuring the First Trunk
349