Hardware Monitor - Asus P5G-TVM Manual

2.5.4

Hardware Monitor

The items in this sub-menu displays the hardware monitor values
automatically detected by the BIOS. It also allows you to change CPU Q-Fan
feature-related parameters. Select an item then press <Enter> to display
the configuration options.
Q-Fan Controller
x CPU Target Temperature
x Temperature Tolerance
Current System Temp.
CPU Temperature
Chassis FAN Speed
CPU FAN Speed
Vcore
Vcc 12V
Vcc 3.3V
Vcc 5.0V
F1:Help
ESC: Exit
Q-Fan Controller [Disabled]
Allows you to enable or disable the Q-Fan controller. When set to Enabled,
the following items CPU Target Temperature and Temperature Tolerance
becomes user-configurable. Configuration options: [Disabled] [Enabled]
CPU Target Temperature [XXXºC/XXXºF]
Allows you to set the temperature threshold when the CPU fan gathers full
speed to lower the CPU temperature.
Temperature Tolerance [XXºC]
Allows you to set the temperature tolerance to maintain the fan speed
as the temperture changes within the range of temperature tolerance.
Configuration options: [2ºC] [4ºC] [6ºC] [8ºC] [8ºC] [10ºC] [12ºC]
Current System Temperature, CPU Temperature
The onboard hardware monitor automatically detects and displays the
system and CPU temperatures. These items are not user-configurable.
2-20
Phoenix-Award BIOS CMOS Setup Utility
Power
Hardware Monitor
↑↓ : Select Item
→←: Select Menu
[Disabled]
60ºC/140ºF
2ºC
38ºC/100ºF
49ºC/120ºF
0 RPM
4962 RPM
[1.37V]
[11.77V]
[3.23V]
[5.12V]
-/+: Change Value
Enter: Select Sub-menu
Select Menu
Item Specific Help
Press [Enter] to
enable or disable
F5: Setup Defaults
F10: Save and Exit
Chapter 2: BIOS setup