Internal Audio Connector (4-Pin Aux1, Cd1); Chasis Intrusion Connector (4-1 Pin Chassis) - Asus P5G-TVM Manual

10. Internal audio connectors (4-pin AUX1, CD1)
These connectors allow you to receive stereo audio input from sound
sources such as a CD-ROM, TV tuner, or MPEG card.
®
P5G-TVM
P5G-TVM Internal audio connectors
11. Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor
or switch. Connect one end of the chassis intrusion sensor or switch
cable to this connector. The chassis intrusion sensor or switch sends
a high-level signal to this connector when a chassis component
is removed or replaced. The signal is then generated as a chassis
intrusion event.
By default, the pins labeled "Chassis Signal" and "Ground" are shorted
with a jumper cap. Remove the jumper caps only when you intend to
use the chassis intrusion detection feature.
®
P5G-TVM
P5G-TVM Chassis intrusion connector
ASUS P5G-TVM
CD1 AUX1
CHASSIS
(Default)
1-31