Table of Contents
Advertisement
Operations
Control panel
01 Course Selector
02 Display
03 Temp.
04 Rinse
05 Spin
06 Dry Level
07 Options
08 Prefer Mode
WD90J7400GW_03478B_EN(EU).indd 31
01
Turn the dial to select a course.
The display shows current course information and estimated time
remaining, or an information code when a problem occurs.
Press to change the water temperature for the current course.
Press to change the rinse count for the current cycle. You can set the
rinse count to a max of 5.
Press to change the spinning speed for the current course.
• Rinse Hold
: The final rinse cycle is suspended so that the
laundry remains in the water. To unload the laundry, run a drain
or spin cycle.
• No Spin
: The drum does not spin after the final drain cycle.
• If you wan to perform spin only, select Rinse+Spin cycle and set
the rinse times to "0" (No number is appears on the display),
then start to perform spin only.
Press this button to select proper drying option.
Press to select an option from Intensive, Prewash, and
Intensive+Prewash. Press again to deselect.
Press to enter custom options screen. 3 custom options are available
but multiple selection is not allowed.
02
03
04
05
06
10
12
09
08
07
11
English 31
2015/3/16 13:28:58
Advertisement
Table of Contents
