Before You Start; Initial Settings - Samsung WD90J7 series User Manual

Before you start

Initial settings

Run Calibration (recommended)
Calibration ensures accurate weight
detection by the washing machine. Make
sure the drum is empty before running
Calibration.
1. Power off, and then power on the
washing machine.
2. Hold down Temp. and Delay End
simultaneously for 3 seconds to enter
Calibration mode. The "CB" message
appears.
3. Press Start/Pause to run the
Calibration cycle.
4. The drum will rotate clockwise
and counter-clockwise for about 3
minutes.
5. When the cycle is complete, "END"
appears on the display and the washing
machine will turn off automatically.
6. The washing machine is now ready for
use.
WD90J7400GW_03478B_EN(EU).indd 25
English 25
2015/3/16 13:28:56