Table of Contents
Advertisement
Installation
STEP 3 Adjust the levelling feet
STEP 4 Connect the water hose
20 English
WD90J7400GW_03478B_EN(EU).indd 20
1. Gently slide the washing machine into
position. Excessive force may damage
the levelling feet.
2. Level the washing machine by manually
adjusting the levelling feet.
3. When levelling is complete, tighten the
nuts using the spanner.
Connect the water hose to the water tap.
1. Remove the adaptor (A) from the water
hose (B).
A
B
2. Use a Philips screwdriver to loosen four
screws on the adaptor.
2015/3/16 13:28:54
Advertisement
Table of Contents
