Samsung WD90J7 series User Manual page 22

Installation
WARNING
Stop using the washing machine if there is a water leak, and contact a local Samsung service
centre. Otherwise, this may cause electric shock.
CAUTION
Do not stretch the water hose by force. If the hose is too short, replace the hose with a
longer, high-pressure hose.
NOTE
• After connecting the water hose to the adaptor, check if it is connected properly by
pulling the water hose downwards.
• Use a popular type of water taps. If the tap is square-shaped or too big, remove the
spacer ring before inserting the tap into the adaptor.
22 English
WD90J7400GW_03478B_EN(EU).indd 22
8. Open the water tap and check if there
are any leaks around the connection
areas. If there are water leaks, repeat the
steps above.
• If using a screw type of water tap,
connect the water hose to the water tap
as shown.
2015/3/16 13:28:56