Motor Removal
Warning : The rotor is not grounded & is moving when the motor is
energized. Unplug the washer before servicing.
• To access the motor, the washer must be placed on its side. Place a towel
or blanket on the floor to prevent scratches to the surface of the
washer.
• Remove the 24-mm (15/16 in. SAE equivalent) rotor nut with a socket or
adjustable Crescent wrench (rotate rotor nut counterclockwise to remove).
• Remove the flat washer.
• Pull the rotor away from the drive shaft.
80
Copyright 2011