Removing The Spare Tire And Tools - GMC Yukon 2007 Owner's Manual

When your vehicle has a flat tire, use the following
example as a guide to assist you in the placement
of wheel blocks.
The following information will tell you how to use
the jack and change a tire.

Removing the Spare Tire and Tools

The equipment you will need to change a flat tire is
stored under the storage tray, which is located on
the driver's side trim panel (over the rear
wheelhouse).
Regular Wheelbase shown, Extended
Wheelbase similar.
1. Remove the tray to access the tools by pulling
up on the finger depression under the jack
symbol.
535