Advertisement
Available languages
Available languages
Install spacers onthe wheel spindle above or
below t he wheel support as shown. Turn t he
spacers so the slot inthe spacer does n ot
align w ith the flat o nthe wheel spindle.
Secure the spacers with the lock pin.
(Figure 7).
NOTE: Set b oth w heels atthe same h eight
foralevel cut.
ign open e nc lespacers
with the flat c ut i nto the caster
fork. R emove
the spacers from
the bottom o fthe stack.
Secure spacers above the
caster arm with the lock p in.
Figure 7
Forward Drive Control (Lower Right
Hand Control)
A
CAUTION:
Unit will move at
engine start if the wheel drive
controls are engaged. ALWAYS
release the wheel drive controls
before starting unit.
NOTE: Engine must be running for wheel
drive to propel unit.
To drive forward:
Hold the parking brake lever against the
handlebar and slowly squeeze and hold the
forward drive control. Hold the forward drive
control against the handlebar for fastest
speed.
To stop:
Release forward drive control.
Parking Brake
Lever
GO
Forward Drive
Control
STOP
OM1240
GB - 13
Advertisement
