Table of Contents
Advertisement
a Input/recording format
[IN] displays the video format (HD/2K/QFHD/4K) of the
input signal, and [FILE] displays the video format of the
recording.
b File name
Displays the name of the file being recorded. "File:
NEXT" is displayed before recording.
c Time code display
Displays time code data (TCG).
In detail display mode, UBG, TM1, and TM2 are also
displayed simultaneously.
d [Setting] button
Displays the [Port] screen (page 27) for the corresponding
port to configure port settings.
e Recording indicator
Displays z mark when recording.
Displays
icon when a loop recording area is specified.
For outputs
The following information is displayed.
Simple indicator
e
f
g
h
Detailed indicator
j
a File/output format
[FILE] displays the video format (HD/2K/QFHD/4K) of
the file, and [OUT] displays the video format of the output
signal.
b File name
Displays the name of the file being played back. "Sub" is
displayed beside the file name when playing back a
subclip.
a
b c
d
f Remaining capacity
Displays the remaining memory capacity.
When a loop recording area is specified, this displays the
capacity of the writable area of the capacity assigned to the
loop recording area. In loop recording, the recording loops
back to the start of the loop recording area when it reaches
the end of the area, overwriting the previous recording.
However, if a subclip is created in a loop recording area
file, the subclip area cannot be overwritten. Accordingly,
the capacity of the loop recording area decreases by the
size of the subclip.
If the remaining capacity that can be used for loop
recording is reduced to less than five minutes after creating
a subclip in the loop recording area, further subclips cannot
be created.
g [IN]
Displays the video format of the input signal.
h [Close] button (detail display mode only)
Closes the port.
i Audio track (detail display mode only)
Displays the signal (SDI or AES/EBU) used for each audio
track.
i
c Time code display
Displays time code data (TCR).
In detail display mode, UBR, TM1, and TM2 are also
displayed simultaneously.
d [Setting] button
Displays the [Port] screen (page 27) for the corresponding
port to configure port settings.
d
17
Advertisement
Table of Contents
